Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: What a wonderful feeling...



- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
What a wonderful feeling...
Permalink  
 


Well, I would've transferred the link to the old one here, but somebody over at TC deleted it!  ****ers!

Anyways...Had TW out today after getting her tabs.  No matter how long she sits, she always fires right up and runs like a champ!  Got a few good blasts out of her before putting her back under the tarp in the driveway. 

April really can't come fast enough.  Once that opening day comes and goes, I know I'll be back in full swing and way past my 'slowing down' phase confuse



__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 



- Big George -

Status: Offline
Posts: 5708
Date:
Permalink  
 

Chad.....
Fix the signature
Glad to see you are at least talking about working on it again.

Tell me when you want those cans of primer, get it down to just blue and gray

-- Edited by kettbo on Saturday 23rd of January 2010 09:48:47 PM

__________________

George Kettler

SOLD 70 Elky 496/th400 3/.90
68 RatVette
68 Camaro Ragtop




- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

My halfass nitrous diagram for purge, just wanted to verify that I was thinking correctly...



Going to run a single purge (Although double would be pretty sick) and going to run it like the diagram shows. I'm sure it's right, I'd just much rather double check. Finally starting to work on the Whore again and her Temporamental side is showing. Putting an order in for a few switches and purge setup and a couple other things to finalize the nitrous.

-- Edited by Juhosaphat on Thursday 4th of February 2010 05:55:01 PM

__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- MattieP -
Washington


Status: Offline
Posts: 2889
Date:
Permalink  
 

thats cute

__________________
1970 chevelle 454 th350 3000 stall, 3.73 gears 12 bolt limited slip 1965 biscayne Big project :)



- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

bigblock70 wrote:

thats cute



That's what happens when you make diagrams with paint on a laptop haha

 



__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Jim -
Seattle, WA


Status: Offline
Posts: 509
Date:
Permalink  
 

Line tool bro. Line tool.

__________________



- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

I didn't make it that far before I got distracted by the pen tool.

__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

Just put the first Summit order in that'll be leading the pack. Only 165$, small order biggrin  Can't wait to get some cash built up and get this new motor going in the right direction finally! 

__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

whisper.gif

__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Johnny Nitro -
Vancouver Island Canada


Status: Offline
Posts: 1136
Date:
Permalink  
 

Chad, a dual purge line is ridiculously simple to do. I only have one purge solenoid, I run the purge line into a T, then run two lines from that up my firewall and out the cowl. Remember to keep them from spraying at your windshield. It will crack the glass if the purge hits it.

__________________

10.76 @ 123 mph

 




- Jeremy -
Hermiston, OR


Status: Offline
Posts: 82
Date:
Permalink  
 

I think the drawing is lovely!

__________________



- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

OutCast wrote:

Chad, a dual purge line is ridiculously simple to do. I only have one purge solenoid, I run the purge line into a T, then run two lines from that up my firewall and out the cowl. Remember to keep them from spraying at your windshield. It will crack the glass if the purge hits it.



I'll probably end up running a double just because I do think it looks pretty badass.  finished up all the wiring today.  Soldered all my connectors, re-ran a couple things more efficiently.  All I need to do is figure out where/how I want to run the momentary switch and then all that's left for the nitrous is the purge and running the line underneath the car. 

Jeremy, thank you haha

I'm thinking one of those spiral cord momentary switches right next to the shifter on the inside of the driver's seat.  That way I can shift and control the nitrous all with one hand.  Or, drill a hole in my kick panel and put the switch there and control it with my left foot.  I feel more comfortable with a hand controlled switch though lol

Goliath's David should be getting on moving forward within the next few weeks too, so George, I hope 454v2 is going to be as good as you're hyping it up to be.

 



__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

Cleaned up the wiring a little more today. Trying to keep the engine compartment as uncluttered as possible. Was going to swap in the rockers I got compliments of Mike P., but I couldn't figure out which setting they were on lol They're adjustable Crane's, 1.5/1.6 ratio. Going to read into them and find out how to determine what setting they're on because from the looks of it, they're on the 1.6 ratio, but I want to varify it before I go ahead and put them on.

A couple pics:


Only one isn't of the adjustable type. Going to look online and see if I can't find one hiding somewhere to have a full set of adjustable rockers. Thanks again Mike P. for your generous donation to TW!




__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Special Greg -
Lynnwood, WA


Status: Offline
Posts: 1522
Date:
Permalink  
 

Looking good!

except for that filler cap... biggrin

__________________
SBC 355/TH350/3.90 12 bolt
1/4 mile = 11.72@115mph on a 75 shot, 12.58@108mph NA
http://www.cardomain.com/ride/2345518



- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

The one that came with the cheap valve covers didn't work and actually fell out a couple times so I just threw the original one in lol

__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Rasen Sie Dämon -
Seattle, WA


Status: Offline
Posts: 2150
Date:
Permalink  
 

Out to the garage I go biggrin

__________________

70' Chevelle 'TW' 383/th350 12.3@103mph

70' Nova 'Hers' 350/th350 14.95@89mph 408 in the works

72' Twister 440/727 Nothing but pieces right now...

64' Falcon four door 'Lil' Blue' 170/3ondatree Cruiser

 




- Johnny Nitro -
Vancouver Island Canada


Status: Offline
Posts: 1136
Date:
Permalink  
 

The setup is looking good. As far as switch goes, I use a B and M shift handle with the button in it. I am going to a wot switch instead, as I am changing to Mike's 1/4 stick, and I would like to keep both hands on the wheel once I hit high gear.

__________________

10.76 @ 123 mph

 



-Urethane Dave - Alger, WA Moderator

Status: Offline
Posts: 4431
Date:
Permalink  
 

OutCast wrote:

The setup is looking good. As far as switch goes, I use a B and M shift handle with the button in it. I am going to a wot switch instead, as I am changing to Mike's 1/4 stick, and I would like to keep both hands on the wheel once I hit high gear.




 Pussy.



__________________

Dave P.

Resident Giant
11.44 @ 118.43




- Johnny Nitro -
Vancouver Island Canada


Status: Offline
Posts: 1136
Date:
Permalink  
 

whitetigerdeformed1.jpe

__________________

10.76 @ 123 mph

 



-Urethane Dave - Alger, WA Moderator

Status: Offline
Posts: 4431
Date:
Permalink  
 

Ugly Pussy at that.hmm

__________________

Dave P.

Resident Giant
11.44 @ 118.43

1 2 325  >  Last»  | Page of 25  sorted by
Quick Reply

Please log in to post quick replies.



Create your own FREE Forum
Report Abuse
Powered by ActiveBoard